Boron removal from wastewater by direct contact membrane distillation system using two-level factorial design

Basit Öğe Kaydı
dc.authorid0000-0003-4661-9661en_US
dc.authorid0000-0001-9180-3623en_US
dc.authorscopusid57219197919en_US
dc.authorscopusid57062703100en_US
dc.authorwosid-en_US
dc.authorwosid-en_US
dc.contributor.authorTan, Burcu
dc.contributor.authorYıldız, Semanur
dc.contributor.authorAngin, Dilek
dc.contributor.authorBektaş, Tijen Ennil
dc.contributor.authorSelengil, Ugur
dc.date.accessioned2024-01-23T06:55:09Z
dc.date.available2024-01-23T06:55:09Z
dc.date.issued2023en_US
dc.departmentFakülteler, Fen Fakültesi, Kimya Bölümü
dc.departmentFakülteler, Mühendislik Fakültesi, Kimya Mühendisliği Bölümü
dc.description.abstractNumerous industries use boron and its compounds in various applications. In this study, the removal of boron from an aqueous solution by direct contact membrane distillation (DCMD) system. A 23 full factorial experimental design was implemented to determine the optimum values and the degree of importance of the parameters. The experiments were performed at low and high levels of temperature, initial pH, and feed boron concentration. Design variables were evaluated in terms of individual, binary, and triple effects. At the 95% confidence level, the temperature–initial pH interaction was found as the most significant factor. The maximum boron removal efficiency can be achieved either at a low level of temperature (30 °C) and pH (4.0), or a high level of temperature (50°C) and pH (11) combinations at 20 mg/L boron concentration with desirability of 0.957.en_US
dc.identifier.citationTan, B., Yıldız, S., Angin, D., Bektaş, T.E. & Selengil, U. (2023). Boron removal from wastewater by direct contact membrane distillation system using two-level factorial design. Journal of Applied Water Engineering and Research. doi: 10.1080/23249676.2023.2198734en_US
dc.identifier.doi10.1080/23249676.2023.2198734
dc.identifier.issn2324-9676
dc.identifier.scopus2-s2.0-85153338796
dc.identifier.urihttps://doi.org/10.1080/23249676.2023.2198734
dc.identifier.urihttps://hdl.handle.net/20.500.12428/5325
dc.identifier.wosWOS:000971203300001
dc.identifier.wosqualityN/A
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.institutionauthorTan, Burcu
dc.institutionauthorBektaş, Tijen Ennil
dc.language.isoen
dc.publisherTaylor and Francis Ltd.en_US
dc.relation.ispartofJournal of Applied Water Engineering and Researchen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectBoronen_US
dc.subjectFull factorial designen_US
dc.subjectMembrane distillationen_US
dc.titleBoron removal from wastewater by direct contact membrane distillation system using two-level factorial design
dc.typeArticle

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
[ X ]
İsim:
Burcu_Tan_Makale.pdf
Boyut:
2.11 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Araştırma Makalesi
İndir
Lisans paketi
Listeleniyor 1 - 1 / 1
[ X ]
İsim:
license.txt
Boyut:
1.44 KB
Biçim:
Item-specific license agreed upon to submission
Açıklama:
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Kimya Bölümü Koleksiyonu
Kimya Mühendisliği Bölümü Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu