An investigation of the effects of cutting parameters and graphite reinforcement on quality characteristics during the drilling of Al/10B4C composites

Basit Öğe Kaydı
dc.authoridMotorcu, Ali Rıza/0000-0002-9129-8935
dc.authoridUZUN, GULTEKIN/0000-0002-6820-8209
dc.contributor.authorEkici, Ergun
dc.contributor.authorMotorcu, Ali Rıza
dc.contributor.authorUzun, Gultekin
dc.date.accessioned2025-01-27T20:45:28Z
dc.date.available2025-01-27T20:45:28Z
dc.date.issued2017
dc.departmentÇanakkale Onsekiz Mart Üniversitesi
dc.description.abstractThis study investigated the effects of cutting parameters on the quality characteristics of thrust force (Ft), surface roughness (Ra), dimensional accuracy (Da) and burr height (Bh) during the drilling of Al/10B(4)C and Al/10B(4)C/5Gr composites. Machinability experiments were carried out with uncoated carbide twist drills at three different cutting speeds (18, 25 and 35 m/min) and three different feed rates (0.08, 0.112 and 0.16 mm/rev) under dry cutting conditions. The percent contribution of the cutting/drilling parameters/variables to the quality characteristics was determined using analysis of variance (ANOVA), and predictive linear equations were developed for the estimation of all the quality characteristics. As a result of the experimental study, it was determined that during the drilling of the composites, the 5% graphite reinforcement of Al/10B(4)C/5Gr decreased the thrust force and the burr height, improved the surface quality and brought the composite closer to its ideal diameter value. (C) 2016 Published by Elsevier Ltd.
dc.description.sponsorshipCanakkale Onsekiz Mart University Scientific Research Projects Unit [2014/227]
dc.description.sponsorshipThe authors would like to express sincere thanks to the Canakkale Onsekiz Mart University Scientific Research Projects Unit for their support of the project (No. 2014/227) and to Yildiz Kalip Inc. for providing the opportunity to use their laboratory facilities and measurement devices in the experimental studies.
dc.identifier.doi10.1016/j.measurement.2016.10.041
dc.identifier.endpage404
dc.identifier.issn0263-2241
dc.identifier.issn1873-412X
dc.identifier.scopus2-s2.0-84992744411
dc.identifier.scopusqualityQ1
dc.identifier.startpage395
dc.identifier.urihttps://doi.org/10.1016/j.measurement.2016.10.041
dc.identifier.urihttps://hdl.handle.net/20.500.12428/24581
dc.identifier.volume95
dc.identifier.wosWOS:000390495400045
dc.identifier.wosqualityQ2
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherElsevier Sci Ltd
dc.relation.ispartofMeasurement
dc.relation.publicationcategoryinfo:eu-repo/semantics/openAccess
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.snmzKA_WoS_20250125
dc.subjectMMCs
dc.subjectDrilling
dc.subjectThrust force
dc.subjectSurface roughness
dc.subjectDimensional accuracy
dc.subjectBurr height
dc.titleAn investigation of the effects of cutting parameters and graphite reinforcement on quality characteristics during the drilling of Al/10B4C composites
dc.typeArticle

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu