THE INDUSTRIAL EFFECTS OF BALL TYPE ON CERAMIC PORCELAIN TILE BODY GRINDING

Basit Öğe Kaydı
dc.authorid0000-0002-4637-7087
dc.contributor.authorDurgut, Emrah
dc.date.accessioned2026-02-03T11:59:47Z
dc.date.available2026-02-03T11:59:47Z
dc.date.issued2025
dc.departmentÇanakkale Onsekiz Mart Üniversitesi
dc.description.abstractRaw materials such as feldspar, kaolin and illitic clay are used in the preparation of ceramic porcelain tile compositions according to their specific properties. Such raw materials are ground in ball mills in order to reduce the particle size to a certain value determined according to the operating conditions. In this study, it was aimed to compare capacity, time and energy spent in the grinding process of porcelain tile composition by using alumina and silica grinding medium from an industrial perspective. In this context, firstly, the grinding properties of the raw materials were determined with porcelain ball mill and Bond mill, separately. Bond Work Index values of magnesite, clay, kaolin and feldspar were determined as 8.7, 7.9, 12.3 and 14.2 kWh/ton, respectively. Then industrial grinding of a porcelain body was executed with a discontinuous horizontal ball mill. The industrial grinding studies showed that porcelain body was ground at 480 and 720 min to reach 2% sieve residue for +45 mu m with alumina and silica ball, respectively, which resulted as 625 ton/h capacity difference. Lastly, the ground materials in alumina and silica medium were compared in terms of water absorption, shrinkage, color and SEM analysis after sintering in porcelain tile conditions.
dc.description.sponsorshipCanakkale Onsekiz Mart University, The Scientific Research Coordination Unit [FBA-2024-4812]
dc.description.sponsorshipThis work was supported by Canakkale Onsekiz Mart University, The Scientific Research Coordination Unit, Project number: FBA-2024-4812. Besides, thanks to the Kaleseramik R&D Center for experimental support.
dc.identifier.doi10.37190/msc/211898
dc.identifier.endpage167
dc.identifier.issn2300-9586
dc.identifier.issn2353-5423
dc.identifier.startpage155
dc.identifier.urihttps://doi.org/10.37190/msc/211898
dc.identifier.urihttps://hdl.handle.net/20.500.12428/34421
dc.identifier.volume32
dc.identifier.wosWOS:001599374000001
dc.identifier.wosqualityQ4
dc.indekslendigikaynakWeb of Science
dc.institutionauthorDurgut, Emrah
dc.language.isoen
dc.publisherWroclaw Univ Technology, Fac Geoengineering Mining & Geology
dc.relation.ispartofMining Science
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/openAccess
dc.snmzKA_WOS_20260130
dc.subjectceramic body
dc.subjectporcelain tile
dc.subjectindustrial raw material
dc.subjectdiscontinuous grinding
dc.subjectalumina and silica ball
dc.titleTHE INDUSTRIAL EFFECTS OF BALL TYPE ON CERAMIC PORCELAIN TILE BODY GRINDING
dc.typeArticle

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu