Effects on machinability of cryogenic treatment applied to carbide tools in the milling of Ti6AI4V with optimization via the Taguchi method and grey relational analysis

Basit Öğe Kaydı
dc.authoridEkici, Ergun/0000-0002-5217-872X
dc.contributor.authorEkici, Ergun
dc.contributor.authorUzun, Gultekin
dc.date.accessioned2025-01-27T21:03:55Z
dc.date.available2025-01-27T21:03:55Z
dc.date.issued2022
dc.departmentÇanakkale Onsekiz Mart Üniversitesi
dc.description.abstractThe effects of processing parameters and cryogenic treatment on cutting force and surface roughness in the milling of Ti6AI4V alloy were investigated in this study. The effects of cutting speed, feed rate, and the treatments applied to the tools were evaluated through the Taguchi method and grey relational analysis. Control factors in the experiments performed under dry cutting conditions were based on two different cutting speeds and three different feed rates and tool properties. It was observed that the cutting force values decreased with increased cutting speed and significantly increased parallel to the feed rate. In terms of surface roughness, they were observed to change based on cutting parameters. Whereas the most effective parameter for cutting force was feed rate, with a 81.9% contribution, for surface roughness it was cutting speed, with a 48.8% contribution. Optimum machining conditions were determined as A(1)B(3)C(2) following the grey relational analysis performed for both responses.
dc.identifier.doi10.1007/s40430-022-03572-1
dc.identifier.issn1678-5878
dc.identifier.issn1806-3691
dc.identifier.issue7
dc.identifier.scopus2-s2.0-85131721095
dc.identifier.scopusqualityQ2
dc.identifier.urihttps://doi.org/10.1007/s40430-022-03572-1
dc.identifier.urihttps://hdl.handle.net/20.500.12428/27494
dc.identifier.volume44
dc.identifier.wosWOS:000808361600003
dc.identifier.wosqualityQ3
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherSpringer Heidelberg
dc.relation.ispartofJournal of The Brazilian Society of Mechanical Sciences and Engineering
dc.relation.publicationcategoryinfo:eu-repo/semantics/openAccess
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.snmzKA_WoS_20250125
dc.subjectTi6AI4V alloy
dc.subjectCryogenic treatment
dc.subjectCutting force
dc.subjectSurface roughness
dc.subjectTaguchi method
dc.subjectGrey relational analysis
dc.titleEffects on machinability of cryogenic treatment applied to carbide tools in the milling of Ti6AI4V with optimization via the Taguchi method and grey relational analysis
dc.typeArticle

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu