Experimental and Statistical Investigation of the Machinability of Al-10% SiC MMC Produced by Hot Pressing Method

Basit Öğe Kaydı
dc.contributor.authorEkici, Ergun
dc.contributor.authorSamtas, Gurcan
dc.contributor.authorGulesin, Mahmut
dc.date.accessioned2025-01-27T20:55:46Z
dc.date.available2025-01-27T20:55:46Z
dc.date.issued2014
dc.departmentÇanakkale Onsekiz Mart Üniversitesi
dc.description.abstractIn this study, during the machining of metal matrix composites produced by a hot pressing method in CNC milling, the effects of cutting parameters and coating type on the surface roughness were experimentally and statistically investigated. The production of composite samples was accomplished by hot pressing, in which Al was used as the matrix element and 10 % SiC particles were chosen for the reinforcing phase. In the machining of samples, three different cutting tools (uncoated, multi-layered and Nano TiAlN coated), three different cutting speeds (60, 78, 101 m/min) and three different feed rates (0.04, 0.08 and 0.12 mm/rev) were employed. Full factorial (3(3)) experimental design was chosen for the statistical investigation of the cutting parameters and parameter interactions. The response surface method was used in the mathematical modelling of the surface roughness obtained from the experiments and in the optimisation of cutting parameters. At the end of the study, the cutting tool's wear was evaluated and the wear was discussed by comparison with similar studies.
dc.identifier.doi10.1007/s13369-014-0951-8
dc.identifier.endpage3298
dc.identifier.issn1319-8025
dc.identifier.issn2191-4281
dc.identifier.issue4
dc.identifier.scopus2-s2.0-84900018073
dc.identifier.scopusqualityQ1
dc.identifier.startpage3289
dc.identifier.urihttps://doi.org/10.1007/s13369-014-0951-8
dc.identifier.urihttps://hdl.handle.net/20.500.12428/26170
dc.identifier.volume39
dc.identifier.wosWOS:000335757000074
dc.identifier.wosqualityN/A
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherSpringer Heidelberg
dc.relation.ispartofArabian Journal For Science and Engineering
dc.relation.publicationcategoryinfo:eu-repo/semantics/openAccess
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.snmzKA_WoS_20250125
dc.subjectMetal matrix composite
dc.subjectCNC milling
dc.subjectSurface roughness
dc.subjectResponse surface methodology
dc.titleExperimental and Statistical Investigation of the Machinability of Al-10% SiC MMC Produced by Hot Pressing Method
dc.typeArticle

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu