Comparative study on ship wave making resistance via viscous and IBEM solvers

dc.authorscopusid57152462800en_US
dc.authorwosid-en_US
dc.contributor.authorÖzdemir, Yavuz Hakan
dc.contributor.authorCoşgun, Taner
dc.contributor.authorBarlas, Barış
dc.date.accessioned2025-02-10T07:00:48Z
dc.date.available2025-02-10T07:00:48Z
dc.date.issued2021en_US
dc.departmentMeslek Yüksekokulları, Deniz Teknolojileri Meslek Yüksekokulu, Motorlu Araçlar ve Ulaştırma Teknolojileri Bölümüen_US
dc.description.abstractThe present paper concerns the numerical modeling of the free surface flow around the Wigley hull using viscous and potential flow based solvers over a range of Froude Numbers from 0.22 to 0.48. Numerical results of the in-house iterative boundary element method (IBEM) code and unsteady Reynolds Averaged Navier-Stokes (URANS) CFD tool presented in comparison with the range and average of the experimental data from the literature. The study aims to identify the Froude number envelope in which potential and viscous solvers work well, and match the results with the physical behavior of the flow. The results reveal that both methods are capable of predicting the wave-making resistance in satisfactory agreement with the experiments at intermediate Froude Numbers. IBEM exhibits slightly better accuracy at very low operating velocities. When the ship is advancing with a forward speed at Fn > 0.4, boundary layer separation related viscous effects and enhancing turbulence in the wake region of the hull cause the IBEM to underestimate the resistance. For low Fns, the deviation from the mean of the experimental data is 5% and 17% for IBEM and URANS, respectively, while the relative errors are calculated as 7% for URANS and 23% for IBEM at the highest Fn. Similarly, when the Fn reaches up to 0.4, the URANS method predicts higher values of wave climbing near the bow region compared to those of the potential solver, while the computations of both methods are very close at lower Fn. Besides these, IBEM enables a greater saving of computational time while reaching through the lower values of Fn. The findings of the study reveal that the present IBEM approach provides quick and reliable numerical solutions till the effect of viscous stress becomes non-negligible (which is Fn < 0.4 for investigated Wigley case), and up to this range, the accuracy of the method is inversely related to the ship velocity.en_US
dc.identifier.citationÖzdemir, Y. H., Coşgun, T., & Barlas, B. (2021). Comparative study on ship wave making resistance via viscous and IBEM solvers. Ocean Engineering, 241, 110074. https://doi.org/10.1016/j.oceaneng.2021.110074en_US
dc.identifier.doi10.1016/j.oceaneng.2021.110074en_US
dc.identifier.issn0029-8018 / 1873-5258
dc.identifier.scopus2-s2.0-85118250273en_US
dc.identifier.scopusqualityQ1
dc.identifier.urihttps://doi.org/10.1016/j.oceaneng.2021.110074
dc.identifier.urihttps://hdl.handle.net/20.500.12428/29594
dc.identifier.volume241en_US
dc.identifier.wosWOS:000718393000004en_US
dc.identifier.wosqualityQ1en_US
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.institutionauthorÖzdemir, Yavuz Hakan
dc.institutionauthorid0000-0002-0406-0532
dc.language.isoengen_US
dc.publisherElsevier Ltden_US
dc.relation.ispartofOcean Engineeringen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectFree surfaceen_US
dc.subjectIterative boundary element methoden_US
dc.subjectPotential flowen_US
dc.subjectURANS (CFD)en_US
dc.subjectWave-making resistanceen_US
dc.subjectWigley hullen_US
dc.titleComparative study on ship wave making resistance via viscous and IBEM solversen_US
dc.typearticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
[ X ]
İsim:
Yavuz Hakan Ozdemir_Makale.pdf
Boyut:
9.69 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Araştırma Makalesi
Lisans paketi
Listeleniyor 1 - 1 / 1
[ X ]
İsim:
license.txt
Boyut:
1.21 KB
Biçim:
Item-specific license agreed upon to submission
Açıklama: