INVESTIGATION OF DRILLING PERFORMANCE OF REINFORCED POLYAMIDE 6 POLYMER COMPOSITE

Basit Öğe Kaydı
dc.authoridYıldırım, Ferhat / 0000-0002-0524-4050
dc.authoridEskizeybek, Volkan / 0000-0002-5373-0379
dc.contributor.authorGenç, Abdurrahman
dc.contributor.authorYıldırım, Ferhat
dc.contributor.authorKoyunbakan, Murat
dc.contributor.authorYetgin, Salih Hakan
dc.contributor.authorEskizeybek, Volkan
dc.contributor.authorKuş, Gözde
dc.date.accessioned2025-01-27T21:01:29Z
dc.date.available2025-01-27T21:01:29Z
dc.date.issued2023
dc.departmentÇanakkale Onsekiz Mart Üniversitesi
dc.description.abstractPolyamides are preferred polymer materials for manufacturing industrial products due to their lightness, resistance to corrosion, ease of processing, and recyclability. In this study, the machinability properties of Polyamide 6 (PA6) polymer composite plates reinforced with chopped carbon fiber (CF) and multi-walled carbon nanotube (MWCNT) in different proportions were investigated by the drilling method using different cutting tools and cutting parameters. The experiments were carried out according to the L16 orthogonal array. Drilling experiments were carried out in a dry environment. The deformations occurring on the inlet and outlet surfaces of the drilled samples were calculated, and the surface roughness (Ra) of the hole walls was measured. According to the results obtained, the particle addition made to the PA6 polymer reduced the Ra. It has been observed that high cutting speed and low feed rate are ideal parameters to achieve low Ra and low inlet-outlet deformations.
dc.description.sponsorshipKutahya Dumlupinar University Scientific Research Coordination Unit [2016-90]
dc.description.sponsorshipThis work was supported by Kutahya Dumlupinar University Scientific Research Coordination Unit, Project number: 2016-90.
dc.identifier.doi10.36306/konjes.1186888
dc.identifier.issn2667-8055
dc.identifier.issue1
dc.identifier.trdizinid1158367
dc.identifier.urihttps://doi.org/10.36306/konjes.1186888
dc.identifier.urihttps://search.trdizin.gov.tr/tr/yayin/detay/1158367
dc.identifier.urihttps://hdl.handle.net/20.500.12428/27063
dc.identifier.volume11
dc.identifier.wosWOS:001312971700012
dc.identifier.wosqualityN/A
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakTR-Dizin
dc.language.isoen
dc.publisherKonya Teknik University
dc.relation.ispartofKonya Journal of Engineering Sciences
dc.rightsinfo:eu-repo/semantics/openAccess
dc.snmzKA_WoS_20250125
dc.subjectDrilling
dc.subjectPolymer Composite
dc.subjectOptimization
dc.subjectPolyamide 6
dc.titleINVESTIGATION OF DRILLING PERFORMANCE OF REINFORCED POLYAMIDE 6 POLYMER COMPOSITE
dc.title.alternativeKatkılı Poliamid 6 Polimer Kompozitin Delinme Performansının İncelenmesi
dc.typeArticle

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim
İsim:
Ferhat Yildirim_Makale.pdf
Boyut:
1.82 MB
Biçim:
Adobe Portable Document Format
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Biga Meslek Yüksekokulu Koleksiyonu
Malzeme Bilimi ve Mühendisliği Bölümü Koleksiyonu
TR-Dizin İndeksli Yayınlar Koleksiyonu