Investigation of Permeability Against Some Metals with a Functional Thiophene Based Polymeric Membrane Sensor
[ X ]
Tarih
2024
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Wiley-V C H Verlag Gmbh
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
There are many advantages of using membranes in the separation of wastewater, but their uses are limited because they are not reusable due to blockages in the membrane. In this study, alginate-based poly(ethyl-methacrylate) (PEMA) polymeric membranes containing previously synthesized IOS, which are known to be selective against Fe3+, were prepared and their permeability against heavy metals such as Cd2+, Co2+, Cu2+, Fe3+, Hg2+ and Pb2+ were investigated. The properties of membranes characterized by UV-Vis and FT-IR spectrophotometry, were investigated with analysis techniques such as SEM, contact angle measurements, TG-DTG, DSC and AFM. As a result of the measurements taken from the UV spectrophotometer of the filtrates passed through various aqueous ion solutions of the membranes as mentioned above, it was concluded that the ion to which the membrane was most selective was the Fe3+ ion. Moreover, it could be said that thanks to the repeated filtration processes the membrane prepared retained some Fe3+ ion in each measurement and could be used many times in the filtration process. Resultantly, it is possible to say that the polymeric Fe3+ membrane sensor produced may be suitable for use when it is necessary to remove Fe3+ ion from a polluted aqueous environment.
Açıklama
Anahtar Kelimeler
polymeric Fe3+ membrane, sensor, thiophene, heavy metal, filtration
Kaynak
Chemistryselect
WoS Q Değeri
N/A
Scopus Q Değeri
Q3
Cilt
9
Sayı
22
