An approach to obtain the structural information from the electrical resistivity well logging curses
[ X ]
Tarih
2019
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Maden Tetkik Ve Arama Genel Mudurlugu-Mta
Erişim Hakkı
info:eu-repo/semantics/openAccess
Özet
In well logging measurements, the effect of the fluid in the well on the resistivity log curves and the investigation depth/distance for 16 and 64 inches logs were investigated in two-dimensional numerical modeling with the assumption that underground structures are symmetrical. Structural information was obtained via recovering the real resistivity values by using the inversion rather than empirical approaches. Generally, in the case of using the conductive fluid (1 ohm.m<) depending on the ratio of unit thickness (k) with respect to the length of log (1) (i.e. k/1), the insulating formations produce an M shaped signs for k/l<1 and appears as the conductive unit that cause fictitious structures in the data. The depth/distance of the research on the other hand causes deviations in the resistivity of structure due to tool length and distance. By the help of the inversion study one of the possible models is obtained. Contribution of this method to such studies is the reveal of compatibility of the resistivity model and data that usually neglected in other approaches.
Açıklama
Anahtar Kelimeler
Kaynak
Bulletin of The Mineral Research and Exploration
WoS Q Değeri
N/A
Scopus Q Değeri
Q3
Cilt
158
