An Experimental and Statistical Evaluation of The Cutting Parameters on The Machinability of Hadfield Steel

Basit Öğe Kaydı
dc.contributor.authorKivak, Turgay
dc.contributor.authorUzun, Gultekin
dc.contributor.authorEkici, Ergun
dc.date.accessioned2025-01-27T21:01:30Z
dc.date.available2025-01-27T21:01:30Z
dc.date.issued2016
dc.departmentÇanakkale Onsekiz Mart Üniversitesi
dc.description.abstractThe effects of cutting tool coatings and cutting parameters (cutting speed, feed rate) on the cutting forces and surface roughness during the turning of Hadfield steel were investigated in this study. Cutting experiments were made on a CNC lathe under dry cutting conditions by employing CVD TiCN/Al2O3/TiN-, PVD TiAlN- and PVD TiAlN/AlCrO-coated cementite carbide inserts. Four different cutting speeds (100, 140, 180, 220 m/min), two different feed rates (0.2, 0.3 mm/rev) and a constant cutting depth of 0.8 mm were used as the cutting parameters. At the end of the tests, cutting force and surface roughness results were subjected to variance (ANOVA) and multiple regression analyses. The experimental results showed that the PVD TiAlN coating was superior to the CVD TiCN/Al2O3/TiN and PVD TiAlN/AlCrO coatings with respect to cutting force and surface roughness. The correlation coefficients of the statistical model developed at the end of the analysis were R-2=0.994 and R-2=0.996 for the cutting forces and surface roughness, respectively. The feed rate was found to be the most effective parameter on the cutting forces and surface roughness, with contribution ratios of 91.31% and 94.79% respectively.
dc.identifier.endpage17
dc.identifier.issn2147-1762
dc.identifier.issue1
dc.identifier.scopus2-s2.0-84961855561
dc.identifier.scopusqualityQ2
dc.identifier.startpage9
dc.identifier.urihttps://hdl.handle.net/20.500.12428/27065
dc.identifier.volume29
dc.identifier.wosWOS:000373402500003
dc.identifier.wosqualityN/A
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherGazi Univ
dc.relation.ispartofGazi University Journal of Science
dc.relation.publicationcategoryinfo:eu-repo/semantics/openAccess
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.snmzKA_WoS_20250125
dc.subjectHadfield steel
dc.subjectCutting force
dc.subjectSurface roughness
dc.subjectANOVA
dc.subjectRegression analysis
dc.titleAn Experimental and Statistical Evaluation of The Cutting Parameters on The Machinability of Hadfield Steel
dc.typeArticle

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu