Evaluation of surface roughness and material removal rate in the wire electrical discharge machining of Al/B4C composites via the Taguchi method

Basit Öğe Kaydı
dc.authoridMotorcu, Ali Rıza/0000-0002-9129-8935
dc.contributor.authorEkici, Ergun
dc.contributor.authorMotorcu, Ali Rıza
dc.contributor.authorKus, Abdil
dc.date.accessioned2025-01-27T20:45:28Z
dc.date.available2025-01-27T20:45:28Z
dc.date.issued2016
dc.departmentÇanakkale Onsekiz Mart Üniversitesi
dc.description.abstractThis study researched the effects of machining parameters on surface roughness and material removal rate in the wire electrical discharge cutting of high-density Al/B4C metal matrix composites produced via the hot pressing method. Wire tension, reinforcement percentage, wire speed, pulse-on time and pulse-off time were set as the control factors. The Taguchi L-18 (2(1)x3(4)) orthogonal array was used in the experiment design and determination of the optimum control factors. Variance analysis was applied to determine the effects of the control factors on the surface roughness and material removal rate. The results showed the most effective parameters to be pulse-on time (30.22%) for surface roughness and wire speed (83.20%) for material removal rate, and the optimum levels of the control factors to be A(2)B(1)C(2)D(1)E(1) and A(2)B(2)C(3)D(2)E(2), respectively. Predictive equations were then developed by applying linear regression analysis, and the adjusted correlation coefficients were calculated as 0.61 for surface roughness and 0.785 for material removal rate.
dc.identifier.doi10.1177/0021998315609788
dc.identifier.endpage2586
dc.identifier.issn0021-9983
dc.identifier.issn1530-793X
dc.identifier.issue18
dc.identifier.scopus2-s2.0-84977147403
dc.identifier.scopusqualityQ1
dc.identifier.startpage2575
dc.identifier.urihttps://doi.org/10.1177/0021998315609788
dc.identifier.urihttps://hdl.handle.net/20.500.12428/24583
dc.identifier.volume50
dc.identifier.wosWOS:000380069000012
dc.identifier.wosqualityQ2
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherSage Publications Ltd
dc.relation.ispartofJournal of Composite Materials
dc.relation.publicationcategoryinfo:eu-repo/semantics/openAccess
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.snmzKA_WoS_20250125
dc.subjectMetal matrix composite (MMC)
dc.subjectwire electrical discharge machining (WEDM)
dc.subjectmaterial removal rate
dc.subjectkerf
dc.subjectsurface roughness
dc.subjectTaguchi method
dc.titleEvaluation of surface roughness and material removal rate in the wire electrical discharge machining of Al/B4C composites via the Taguchi method
dc.typeArticle

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu