Investigation of the WEDM of Al/B4C/Gr reinforced hybrid composites using the Taguchi method and response surface methodology

Basit Öğe Kaydı
dc.authoridMotorcu, Ali Rıza/0000-0002-9129-8935
dc.contributor.authorMotorcu, Ali Rıza
dc.contributor.authorEkici, Ergun
dc.contributor.authorKus, Abdil
dc.date.accessioned2025-01-27T20:45:28Z
dc.date.available2025-01-27T20:45:28Z
dc.date.issued2016
dc.departmentÇanakkale Onsekiz Mart Üniversitesi
dc.description.abstractIn this study, the effects of machining parameters on the material removal rate (MRR) and surface roughness (Ra) were investigated during the cutting of Al/B4C/Gr hybrid composites by wire electrical discharge machining (WEDM). Wire speed (W-S), pulse-on time (T-on) and pulse-off time (T-off) were chosen as the control factors. The L-27 (3(3)) orthogonal array in the Taguchi method was used in the experimental design and for the determination of optimum control factors. Response surface methodology was also used to determine interactions among the control factors. Variance analysis (ANOVA) was applied in the determination of the effects of control factors on the MRR and Ra. According to the ANOVA results, the most effective parameters on MRR and Ra were wire speed with a 85.94% contribution ratio, and pulse-on-time with a 47.7% contribution ratio. The optimum levels of the control factors for MRR and Ra were determined as A(3)B(3)C(3) and A(1)B(1)C(2). In addition, second-order predictive models were developed for MRR and Ra; correlation coefficients (R-2) were calculated as 0.992 and 0.63.
dc.identifier.doi10.1515/secm-2014-0063
dc.identifier.endpage445
dc.identifier.issn0792-1233
dc.identifier.issn2191-0359
dc.identifier.issue4
dc.identifier.scopus2-s2.0-84978821792
dc.identifier.scopusqualityQ3
dc.identifier.startpage435
dc.identifier.urihttps://doi.org/10.1515/secm-2014-0063
dc.identifier.urihttps://hdl.handle.net/20.500.12428/24582
dc.identifier.volume23
dc.identifier.wosWOS:000379515700012
dc.identifier.wosqualityQ4
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherWalter De Gruyter Gmbh
dc.relation.ispartofScience and Engineering of Composite Materials
dc.relation.publicationcategoryinfo:eu-repo/semantics/openAccess
dc.rightsinfo:eu-repo/semantics/openAccess
dc.snmzKA_WoS_20250125
dc.subjectAl/B4C/Gr hybrid composite
dc.subjectmaterial removal rate
dc.subjectsurface roughness
dc.subjectTaguchi method
dc.subjectwire electrical discharge machining
dc.titleInvestigation of the WEDM of Al/B4C/Gr reinforced hybrid composites using the Taguchi method and response surface methodology
dc.typeArticle

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu