Investigation of effects of layer positions on mechanical buckling behavior of axially layered functionally graded beams

Basit Öğe Kaydı
dc.contributor.authorEvran, Savas
dc.date.accessioned2025-01-27T20:31:17Z
dc.date.available2025-01-27T20:31:17Z
dc.date.issued2019
dc.departmentÇanakkale Onsekiz Mart Üniversitesi
dc.description.abstractThe aim of this research is to examine the mechanical buckling behavior of multi-layered functionally graded beams in the axial direction. Numerical buckling analyses were performed using finite element software called ANSYS. Each beam configuration is suggested to be three layers prepared using various percent volume fractions of Zirconia (ZrO2) and Aluminum (Al) materials. The levels of layers and layer positions of the beams were evaluated according to Taguchi's L-9 (33) orthogonal array technique. Layers were determined as control factor and so nine numerical analyses were performed under clamped-clamped boundary conditions. The first mode shapes of the axially layered functionally graded beams were demonstrated in order to detect the most affected layers as visually. Analysis of signal-to-noise ratio was applied to obtain the optimum levels of layers. Analysis of Variance (ANOVA) was employed to solve the layers with significant impacts and their percent contributions on numerical results. The maximum buckling load was determined using various positions of layers with the optimum levels obtained based on Taguchi methodology.
dc.identifier.doi10.5505/pajes.2018.00243
dc.identifier.endpage26
dc.identifier.issn1300-7009
dc.identifier.issn2147-5881
dc.identifier.issue1
dc.identifier.startpage20
dc.identifier.trdizinid306340
dc.identifier.urihttps://doi.org/10.5505/pajes.2018.00243
dc.identifier.urihttps://search.trdizin.gov.tr/tr/yayin/detay/306340
dc.identifier.urihttps://hdl.handle.net/20.500.12428/23078
dc.identifier.volume25
dc.identifier.wosWOS:000459408300004
dc.identifier.wosqualityN/A
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakTR-Dizin
dc.language.isoen
dc.publisherPamukkale Univ
dc.relation.ispartofPamukkale University Journal of Engineering Sciences-Pamukkale Universitesi Muhendislik Bilimleri Dergisi
dc.relation.publicationcategoryinfo:eu-repo/semantics/openAccess
dc.rightsinfo:eu-repo/semantics/openAccess
dc.snmzKA_WoS_20250125
dc.subjectFunctionally graded materials
dc.subjectBeam
dc.subjectBuckling
dc.subjectFinite element method
dc.titleInvestigation of effects of layer positions on mechanical buckling behavior of axially layered functionally graded beams
dc.typeArticle

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
TR-Dizin İndeksli Yayınlar Koleksiyonu