Cutting Rate and Surface Characteristic Analysis in CNC Wire Electrical Discharge Machining of Aluminium Bronze

Basit Öğe Kaydı
dc.authoridKURT, MUSTAFA/0000-0001-8714-977X
dc.authoridEvran, Savas/0000-0002-7512-5997
dc.authoridMutlu Mitil, Bilcen/0000-0003-1598-4850
dc.contributor.authorEvran, Savas
dc.contributor.authorMutlu, Bilcen
dc.contributor.authorKurt, Mustafa
dc.date.accessioned2025-01-27T20:49:53Z
dc.date.available2025-01-27T20:49:53Z
dc.date.issued2019
dc.departmentÇanakkale Onsekiz Mart Üniversitesi
dc.description.abstractIn this study, cutting rate and surface characteristic analysis in wire electrical discharge machining of aluminium bronze were investigated. Cutting rate analyses were performed according to Taguchi L18 (2(1)x3(2)) orthogonal array. Machining parameters such as wire type, duration between two pulses (Br) and pulse time (AT) were used as control factors. Raw data obtained for cutting rate were converted to S/N ratio values. Optimum levels of the machining parameters for cutting rate were determined using analysis of signal-to-noise (S/N) ratio. Significant machining parameters and their percentage contributions on results were obtained using Analysis of Variance (ANOVA). Regression analysis was performed to model the relationship between cutting rate and machining parameters. Analyses of surfaces machined of workpiece using both two wires for minimum and maximum cutting rate were observed using scanning electron microscope (SEM) and surface roughness device.
dc.identifier.doi10.17559/TV-20180203185742
dc.identifier.endpage1233
dc.identifier.issn1330-3651
dc.identifier.issn1848-6339
dc.identifier.issue5
dc.identifier.scopus2-s2.0-85073604260
dc.identifier.scopusqualityQ3
dc.identifier.startpage1228
dc.identifier.urihttps://doi.org/10.17559/TV-20180203185742
dc.identifier.urihttps://hdl.handle.net/20.500.12428/25344
dc.identifier.volume26
dc.identifier.wosWOS:000489225700005
dc.identifier.wosqualityQ4
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherUniv Osijek, Tech Fac
dc.relation.ispartofTehnicki Vjesnik-Technical Gazette
dc.relation.publicationcategoryinfo:eu-repo/semantics/openAccess
dc.rightsinfo:eu-repo/semantics/openAccess
dc.snmzKA_WoS_20250125
dc.subjectcutting rate
dc.subjectScanning Electron Microscope (SEM)
dc.subjectsurface finish
dc.subjectWire Electrical Discharge Machining (WEDM)
dc.titleCutting Rate and Surface Characteristic Analysis in CNC Wire Electrical Discharge Machining of Aluminium Bronze
dc.typeArticle

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu