A comparison of cooling methods in the pocket milling of AA5083-H36 alloy via Taguchi method

Basit Öğe Kaydı
dc.contributor.authorPinar, Ahmet Murat
dc.contributor.authorFiliz, Serhat
dc.contributor.authorUnlu, Bekir Sadik
dc.date.accessioned2025-01-27T21:01:29Z
dc.date.available2025-01-27T21:01:29Z
dc.date.issued2016
dc.departmentÇanakkale Onsekiz Mart Üniversitesi
dc.description.abstractIn this study, classical and vortex tube cooling methods are compared in the pocket machining of AA5083-H36 alloy with uncoated cemented carbide cutting tool. The effects of cutting speed, feed rate, axial/radial depth of cut and nose radius and their two-way interactions on the surface roughness, and the optimization of surface roughness are investigated via Taguchi method. The experiments conducted based on Taguchi's L16 orthogonal array (OA) are assessed with analysis of variance (ANOVA) and signal to noise (S/N) ratio. As a result, in both cooling methods, it is obtained that roughness correlates negatively with cutting speed and radial depth of cut and positively with feed rate and axial depth of cut. While in the cooling with vortex tube, lower average R (a) values are observed in the experiments with the nose radius of 0.8 mm, in the classical cooling almost no change is obtained. Lastly, optimum roughnesses for the classical and vortex tube cooling are obtained as 0.164 and 0.188 mu m, respectively.
dc.description.sponsorshipCelal Bayar University, Department of Scientific Research Projects [2012/28]
dc.description.sponsorshipThis study was funded by Celal Bayar University, Department of Scientific Research Projects (2012/28).
dc.identifier.doi10.1007/s00170-015-7666-1
dc.identifier.endpage1440
dc.identifier.issn0268-3768
dc.identifier.issn1433-3015
dc.identifier.issue9-12
dc.identifier.scopus2-s2.0-84939228720
dc.identifier.scopusqualityQ1
dc.identifier.startpage1431
dc.identifier.urihttps://doi.org/10.1007/s00170-015-7666-1
dc.identifier.urihttps://hdl.handle.net/20.500.12428/27062
dc.identifier.volume83
dc.identifier.wosWOS:000373156000001
dc.identifier.wosqualityQ2
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherSpringer London Ltd
dc.relation.ispartofInternational Journal of Advanced Manufacturing Technology
dc.relation.publicationcategoryinfo:eu-repo/semantics/openAccess
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.snmzKA_WoS_20250125
dc.subjectSurface roughness
dc.subjectPocket milling
dc.subjectOptimization
dc.subjectTaguchi method
dc.subjectCooling strategies
dc.subjectVortex tube
dc.titleA comparison of cooling methods in the pocket milling of AA5083-H36 alloy via Taguchi method
dc.typeArticle

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu