Investigation of the effects of machining parameters on the thrust force and cutting torque in the drilling of AISI D2 and AISI D3 cold work tool steels

Basit Öğe Kaydı
dc.authoridKAPLAN, Yavuz/0000-0002-3144-9332
dc.authoridMotorcu, Ali Rıza/0000-0002-9129-8935
dc.contributor.authorKaplan, Yavuz
dc.contributor.authorOkay, Senol
dc.contributor.authorMotorcu, Ali Rıza
dc.contributor.authorNalbant, Muammer
dc.date.accessioned2025-01-27T21:01:30Z
dc.date.available2025-01-27T21:01:30Z
dc.date.issued2014
dc.departmentÇanakkale Onsekiz Mart Üniversitesi
dc.description.abstractIn this study, the effects of workpiece hardness, drill diameter, drill length and drilling parameters on thrust force and cutting torque are investigated in the drilling of AISI D2 and AISI D3 cold work tool steels under dry drilling conditions. The experiments are performed at three cutting speeds (5, 10 and 15 in/rnin) and three feed rates (0.04, 0.05 and 0.06 mm/rev). Workpiece hardness, drill diameter, drill length, cutting speed are considered as independent variables (machining parameters), and full factorial design is selected for experimental trials. Analysis of variance (ANOVA) is employed to determine the most significant, machining parameters on the thrust force and cutting torque. The predictive equations are developed in confidence intervals with the linear regression analysis to obtain the thrust force and cutting torque as a function of machining parameters and the correlation coefficients (R-2) of equations for thrust force and cutting torque are calculated as 92.7% and 84.1%, respectively. As a result of this study, it is found that all of the machining parameters are effective on the thrust force and cutting torque. Thrust force and cutting torque increase with the increase of workpiece material hardness, drill diameter, drill length, feed rate and number of holes, and decrease with the increase of cutting speed.
dc.identifier.endpage138
dc.identifier.issn0971-4588
dc.identifier.issn0975-1017
dc.identifier.issue2
dc.identifier.scopus2-s2.0-84901242296
dc.identifier.scopusqualityQ3
dc.identifier.startpage128
dc.identifier.urihttps://hdl.handle.net/20.500.12428/27064
dc.identifier.volume21
dc.identifier.wosWOS:000337988300002
dc.identifier.wosqualityQ4
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherNatl Inst Science Communication-Niscair
dc.relation.ispartofIndian Journal of Engineering and Materials Sciences
dc.relation.publicationcategoryinfo:eu-repo/semantics/openAccess
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.snmzKA_WoS_20250125
dc.subjectCold work tool steel
dc.subjectThrust force
dc.subjectCutting torque
dc.subjectDrilling
dc.subjectFull factorial design
dc.titleInvestigation of the effects of machining parameters on the thrust force and cutting torque in the drilling of AISI D2 and AISI D3 cold work tool steels
dc.typeArticle

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu