Determination of Cutting Properties, Protein and Mineral Content of Silage Corn Stalk

Basit Öğe Kaydı
dc.contributor.authorKocabiyik, Habib
dc.contributor.authorPolat, Refik
dc.contributor.authorOktem, Abdullah
dc.date.accessioned2025-01-27T20:55:44Z
dc.date.available2025-01-27T20:55:44Z
dc.date.issued2009
dc.departmentÇanakkale Onsekiz Mart Üniversitesi
dc.description.abstractThe present research determined maximum shearing force, shearing stress, shearing energy and specific shearing energy for silage corn stalks. The mechanics of shearing on rigid surfaces was investigated via cutting tests. Shearing forces were measured using a cutting experiment setup and dynamometer. The specific shearing energy was calculated by using the area under the cutting force curve versus displacement curve. The shearing properties of corn stalks were evaluated at three moisture content levels of 66.5, 53.6 and 45.8 % d.b. The shearing properties were also evaluated at four sections of the corn stalks, from the bottom to the top (0-10, 10-20, 20-30 and 30-40 cm). At the end of the research, maximum shearing force, shearing stress, total shearing energy and specific shearing energy increased from 63.36 to 97.28 N, from 93.16 to 143.38 MPa, from 216.36 to 284.93 J and from 35.18 to 57.21 J cm(2), respectively in the moisture range from 66.5 to 45.8 % db. The results showed that the shearing values increased as the moisture content increased from the lower to the upper stalk sections. The protein content of silage corn stalk was 2.49 %. Macro nutrient values in the silage corn stalk such as Ca, P and S were determined as 0.346, 0.156 and 0.140%, respectively. Micro nutrient values in the silage corn stalk such as Fe, Cu, Zn and Mn values were 10.32, 2.92, 13.12 and 16.44 mg kg(-1), respectively.
dc.identifier.endpage5590
dc.identifier.issn0970-7077
dc.identifier.issue7
dc.identifier.scopus2-s2.0-69949093655
dc.identifier.scopusqualityQ4
dc.identifier.startpage5580
dc.identifier.urihttps://hdl.handle.net/20.500.12428/26151
dc.identifier.volume21
dc.identifier.wosWOS:000269018200087
dc.identifier.wosqualityQ4
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherAsian Journal Of Chemistry
dc.relation.ispartofAsian Journal of Chemistry
dc.relation.publicationcategoryinfo:eu-repo/semantics/openAccess
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.snmzKA_WoS_20250125
dc.subjectSilage corn stalk
dc.subjectPhysical-mechanical properties
dc.subjectShearing force
dc.subjectProtein and Mineral content
dc.titleDetermination of Cutting Properties, Protein and Mineral Content of Silage Corn Stalk
dc.typeArticle

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu