Examining and Optimizing the Weld Area and Mechanical Performance of Thermoplastic Parts Manufactured by Additive Manufacturing and Welded by Friction Stir Welding

Basit Öğe Kaydı
dc.authoridMotorcu, Ali Rıza / 0000-0002-9129-8935
dc.contributor.authorGüden, Şehmus
dc.contributor.authorMotorcu, Ali Rıza
dc.contributor.authorYazıcı, Murat
dc.date.accessioned2025-01-27T21:02:09Z
dc.date.available2025-01-27T21:02:09Z
dc.date.issued2024
dc.departmentÇanakkale Onsekiz Mart Üniversitesi
dc.description.abstractThis study presents an experimental investigation into the weldability of ABS M30 (acrylonitrile butadiene styrene) plates produced by Additive Manufacturing (AM) using Friction Stir Welding (FSW). The effects of FSW process parameters on the yield stress and their optimal levels were determined using the Taguchi method. The optimal welding parameters were found to be a 16 mm tool shoulder diameter, 800 rpm tool rotation speed, and 10 mm/min traverse speed. The weld area of each sample welded using FSW was examined at a macroscopic level. The direction of tool rotation significantly affects the quality and strength of the FSW. When the FSW was performed with a clockwise rotation of the welding tool, a perfect weld could not be achieved. The tunnel effect resulted in gaps in the weld area of the samples at high rotation speeds. Differences were observed in the density between the weld area of the samples and the main parts.
dc.identifier.doi10.5937/fme2402279G
dc.identifier.endpage294
dc.identifier.issn1451-2092
dc.identifier.issn2406-128X
dc.identifier.issue2
dc.identifier.scopus2-s2.0-85192238605
dc.identifier.scopusqualityQ2
dc.identifier.startpage279
dc.identifier.urihttps://doi.org/10.5937/fme2402279G
dc.identifier.urihttps://hdl.handle.net/20.500.12428/27296
dc.identifier.volume52
dc.identifier.wosWOS:001206880700010
dc.identifier.wosqualityN/A
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherUniv Belgrade, Fac Mechanical Engineering
dc.relation.ispartofFme Transactions
dc.relation.publicationcategoryinfo:eu-repo/semantics/openAccess
dc.rightsinfo:eu-repo/semantics/openAccess
dc.snmzKA_WoS_20250125
dc.subjectAdditive manufacturing
dc.subjectFriction stir welding
dc.subjectThermoplastics
dc.subjectTaguchi method
dc.subjectYield stress
dc.subjectAcrylonitrile butadiene styrene
dc.titleExamining and Optimizing the Weld Area and Mechanical Performance of Thermoplastic Parts Manufactured by Additive Manufacturing and Welded by Friction Stir Welding
dc.title.alternativeIspitivanje i optimizacija površine zavara i mehaničkih performansi termoplastičnih delova proizvedenih aditivnom proizvodnjom i zavarenih zavarivanjem trenjem
dc.typeArticle

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim
İsim:
Ali Riza Motorcu_Makale.pdf
Boyut:
2.01 MB
Biçim:
Adobe Portable Document Format
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Endüstri Mühendisliği Bölümü Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu