The Optimization of Machining Parameters Using the Taguchi Method for Surface Roughness of AISI 8660 Hardened Alloy Steel

Basit Öğe Kaydı
dc.contributor.authorMotorcu, Ali Rıza
dc.date.accessioned2025-01-27T20:24:25Z
dc.date.available2025-01-27T20:24:25Z
dc.date.issued2010
dc.departmentÇanakkale Onsekiz Mart Üniversitesi
dc.description.abstractThe silt face roughness in the turning of AISI 8660 hardened alloy steels by ceramic based cutting toots was investigated in terms of main cutting parameters such as cutting speed, feed rate, depth of cut in addition to tool's nose radius, using a statistical approach. Machining tests were carried out with PVD-coated ceramic. cutting tools under different conditions. An orthogonal design, signal-to-noise ratio and analysis of variance were employed to find out the effective cutting parameters and nose radius on the surface roughness. The obtained results indicate that the feed rate was found to be the dominant factor among controllable factors on the surface roughness. followed by depth of cut and tool's nose radius. However, the cutting speed showed an insignificant effect. Furthermore, the interaction of feed rate/depth of cut was found to he significant on the surface finish due to surface hardening of steel. Optimal testing parameters for surface roughness could be calculated. Moreover, the second order regression model also shows that the predicted values were very close to the experimental one for surface roughness. (C) 2010 Journal of Mechanical Engineering. All rights reserved.
dc.identifier.endpage401
dc.identifier.issn0039-2480
dc.identifier.issue6
dc.identifier.startpage391
dc.identifier.urihttps://hdl.handle.net/20.500.12428/22215
dc.identifier.volume56
dc.identifier.wosWOS:000281888500006
dc.identifier.wosqualityQ3
dc.indekslendigikaynakWeb of Science
dc.language.isoen
dc.publisherAssoc Mechanical Engineers Technicians Slovenia
dc.relation.ispartofStrojniski Vestnik-Journal of Mechanical Engineering
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.snmzKA_WoS_20250125
dc.subjectceramic cutting tools
dc.subjectsurface roughness model
dc.subjectTaguchi method
dc.subjecthardened alloy steel
dc.titleThe Optimization of Machining Parameters Using the Taguchi Method for Surface Roughness of AISI 8660 Hardened Alloy Steel
dc.typeArticle

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu