Kuantum nokta modifiye elektrotlar kullanılarak amperometrik glukoz biyosensör tasarımı

dc.contributor.advisorDilgin, Yusuf
dc.contributor.authorSağlam, Özlem
dc.date.accessioned2025-01-26T20:52:58Z
dc.date.available2025-01-26T20:52:58Z
dc.date.issued2016
dc.departmentÇOMÜ, Enstitüler, Fen Bilimleri Enstitüsü, Kimya Ana Bilim Dalı
dc.descriptionFen Bilimleri Enstitüsü, Kimya Ana Bilim Dalı
dc.description.abstractBu çalışmada anorganik yarı iletken nanomateryaller (CdS-ZnS), iki farklı elektrot (çok duvarlı karbon nanotüp/camımsı karbon elektrot (GCE/MWCNT) ve kalem grafit elektrot (PGE)) yüzeyine modifiye edilmiş ve elde edilen bu kuantum nokta modifiye elektrotlara glukoz oksidaz (GOD) enzimi immobilize edilmiştir. Hazırlanan elektrotlar akışa enjeksiyon analiz (Flow injection analysis, FIA) sisteminde oksidaz enzimine dayalı amperometrik ve fotoamperometrik glukoz biyosensörü tasarımında kullanılmıştır. Her bir elektrodun SEM görüntüleri alınarak yüzeysel karakterizasyonu ve Fe(CN)64-/3- redoks probu ortamında impedans eğrileri ve döngüsel voltammogramları kaydedilerek elektrokimyasal karakterizasyonu gerçekleştirilmiştir. Optimum koşullar altında, PGE/CdS-ZnS/GOD ve GCE/MWCNT/CdS-ZnS/GOD kullanılarak tasarlanan glukoz biyosensörü için doğrusal aralık 0,01-1,0 mM glukoz olarak bulunmuştur. Bu çalışmada PGE için yeni bir akış hücresi tasarlanarak yine ilk defa FIA sisteminde bir amperometrik glukoz biyosensörü geliştirilmiştir. İlaveten, GCE/MWCNT/CdS-ZnS/GOD modifiye elektrot kullanılarak FIA sisteminde fotoelektrokimyasal glukoz biyosensörü de geliştirilmiştir. Gözlenebilme sınırı bu elektrot için 5,0 µM iken, elektrot yüzeyi ışıklandırıldığında bu değer 3,0 µM olarak bulunmuştur. Bu çalışmanın sonucunda GCE/MWCNT/CdS-ZnS/GOD modifiye elektrot kullanılarak glukoz için ilk defa fotoelektrokimyasal biyosensör FIA sisteminde başarılı bir şekilde geliştirilmiştir.
dc.description.abstractIn this study inorganic semiconductor nanomaterials (CdS-ZnS) modified onto two different electrodes (multi wall carbon electrode/ glassy carbon electrode (GCE/MWCNT) and pencil graphite electrode (PGE)) surface and glucose oxidase (GOD) was immobilized onto obtained quantum dot modified electrodes. These prepared electrodes have been used to design amperometric and photoamperometric glucose biosensor based on oxidase enzyme in flow injection analysis (FIA) system. The characterization of each electrode was performed by scanning their SEM images for surface characterization and by recording their impedance curves and cyclic voltammograms in Fe(CN)64-/3- redox probe media for electrochemical characterization. Linear range was found as 0,01-1,0 mM glucose for designed glucose biosensor using PGE/CdS-ZnS/GOD and GCE/MWCNT/CdS-ZnS/GOD under optimum conditions. In this study, an amperometric glucose biosensor has been developed in FIA system using a new designed flow cell for PGE for the first time. In addition, photoelectrochemical glucose biosensor was developed in FIA system using GCE/MWCNT/CdS-ZnS/GOD modified electrode. While the detection limit was found as 5,0 µM, this value was found as 3,0 ?M when electrode surface was illuminated. As a result of this study, photoelectrochemical biosensor has been developed succesfully for glucose in FIA system using GCE/MWCNT/CdS-ZnS/GOD modified electrode for the first time.
dc.identifier.endpage126
dc.identifier.startpage1
dc.identifier.urihttps://tez.yok.gov.tr/UlusalTezMerkezi/TezGoster?key=Br_XTptK8CZ70f0JGX9xEooVN1qOMNgZCdrZ24ez84CDCEEZ6XCvFWpdDdebpHvp
dc.identifier.urihttps://hdl.handle.net/20.500.12428/8510
dc.identifier.yoktezid424063
dc.language.isotr
dc.publisherÇanakkale Onsekiz Mart Üniversitesi
dc.relation.publicationcategoryTez
dc.rightsinfo:eu-repo/semantics/openAccess
dc.snmzKA_Tez_20250125
dc.subjectKimya
dc.subjectChemistry
dc.titleKuantum nokta modifiye elektrotlar kullanılarak amperometrik glukoz biyosensör tasarımı
dc.title.alternativeConstruction of amperometric glucose biosensor using quantum dot modified electrodes
dc.typeMaster Thesis

Dosyalar