Twisting Angle Analysis of Laminated Composite Plates Using Numerical and Statistical Methods
[ X ]
Tarih
2019
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Erişim Hakkı
info:eu-repo/semantics/openAccess
Özet
This study deals with the investigation of the effects of fiber orientationangles on the analysis of angle of twist of laminated composite plates under cantileverboundary conditions with left edge clamped and remaining edges free (C-F-F-F).Numerical twisting angle analyses were conducted based on Taguchi’s L8 ortogonalarray. The plates were designed using 8 plies and each two plies was determined to be acontrol factor. The fiber orientation angles in each control factor were assumed to varyfrom 100 to 800 through the axial direction. Analysis of signal-to-noise (S/N) ratio wasperformed to see the effects of fiber angles and to determine the optimum levels forminimum twisting angle. Analysis of Variance (ANOVA) was applied to analyze thesignificant control factors and percent contributions on the twisting angle results.Regression analysis was employed mathematically in order to see the effects of the fiberangles on the response. According to ANOVA result, the most effective control factorswere found to be D with 87.51 %, C with 10.26 %, A with 1.22 %, and B with 0.04 %respectively.
Açıklama
Anahtar Kelimeler
Malzeme Bilimleri, Özellik ve Test, Malzeme Bilimleri, Kompozitler, İstatistik ve Olasılık
Kaynak
Süleyman Demirel Üniversitesi Fen Bilimleri Enstitüsü Dergisi
WoS Q Değeri
Scopus Q Değeri
Cilt
23
Sayı
2
