CONSTITUTIVE MODELING OF MASONRY WALLS UNDER IN-PLANE LOADINGS

Basit Öğe Kaydı
dc.contributor.authorAktan, Selen
dc.contributor.authorDoran, Bilge
dc.date.accessioned2025-01-27T21:23:51Z
dc.date.available2025-01-27T21:23:51Z
dc.date.issued2016
dc.departmentÇanakkale Onsekiz Mart Üniversitesi
dc.description.abstractThe aim of this study is to examine the behavior of the historic masonry walls by analyzing both the experimental and numerical results. In the experimental part of the study, original material parameters used in repair, strengthening and restoration of historical monuments were determined. For this purpose, in the context of the research Project numbered as 111M568; the characteristics of the original building materials for the brick and mortar specimens from two distinct historical monuments that are located in Turkey were obtained. Physical and mechanical properties of these materials were calculated and in the direction of this results, new mortars were produced. New masonry walls were constructed with the clay bricks and different types of produced mortar. The experimental walls were subjected to compression and incremental lateral loads and the results were evaluated within the load-displacement relations. Experimental walls were modelled with a new approach called 'fictitious joint material' in which the constitutive behavior of the mortar joint and the brick-mortar interface were included together. In this scope of this work, an elasto-plastic damage (EPD) approach is adapted calibrating the parameters of Oliver's damage model [1] together with the modified von-Mises yield criterion for the masonry constituents.
dc.identifier.endpage171
dc.identifier.issn1304-7205
dc.identifier.issn1304-7191
dc.identifier.issue2
dc.identifier.startpage165
dc.identifier.urihttps://hdl.handle.net/20.500.12428/29346
dc.identifier.volume7
dc.identifier.wosWOS:000408131200004
dc.identifier.wosqualityN/A
dc.indekslendigikaynakWeb of Science
dc.language.isotr
dc.publisherYildiz Technical Univ
dc.relation.ispartofSigma Journal of Engineering and Natural Sciences-Sigma Muhendislik Ve Fen Bilimleri Dergisi
dc.relation.publicationcategoryinfo:eu-repo/semantics/openAccess
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.snmzKA_WoS_20250125
dc.subjectConstitutive modeling
dc.subjectfinite element method
dc.subjectelasto-plastic damage model
dc.subjecthistorical masonry wall
dc.titleCONSTITUTIVE MODELING OF MASONRY WALLS UNDER IN-PLANE LOADINGS
dc.typeArticle

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu