Yazar "Haspulat Taymaz, Bircan" seçeneğine göre listele
Listeleniyor 1 - 7 / 7
Sayfa Başına Sonuç
Sıralama seçenekleri
Öğe A novel polyaniline/NiO nanocomposite as a UV and visible-light photocatalyst for complete degradation of the model dyes and the real textile wastewater(Springer, 2021) Haspulat Taymaz, Bircan; Eskizeybek, Volkan; Kamış, HandanThe textile processing industry utilizes enormous amounts of water. After the dying process, the wastewater discharged to the environment contains carcinogens, non-biodegradable, toxic, and colored organic materials. This study aimed to develop a nanocomposite material with improved photocatalytic activity to degrade textile dyes and without a need for a post-separation process after the use. For this, nickel oxide nanoparticles (NiO NPs) were synthesized by a simple method in aqueous media. Then, NiO-doped polyaniline (PANI/NiO) with efficient absorption in the visible region (optical band gap of 2.08 eV) synthesized on a stainless steel substrate with electropolymerization of aniline in the aqueous media. The photocatalytic activity of PANI/NiO film was also investigated by the degradation of model dyes. Under UV and visible light irradiation, the PANI/NiO film degraded methylene blue and rhodamine B dyes entirely in 30 min. Moreover, the PANI/NiO film was also utilized to degrade real textile wastewater (RTW) without applying any pre-process; it was entirely decomposed by the nanocomposite film in only 45 min under UV light irradiation. The photocatalytic reaction rate of the pure PANI film is increased as 2.5 and 1.5 times with the addition of NiO NPs under UV and visible light irradiations for degradation RTW, respectively. The photocatalytic efficiency was attributed to reduced electron-hole pair recombination on the photocatalyst surface. Furthermore, the photocatalytic stability is discussed based on re-use experiments. The photocatalytic performance remains nearly unchanged, and the degradation of dyes is kept 94% after five cycles.Öğe Adsorption-Assisted Photocatalytic Degradation of Anionic Direct Yellow-50 and Cationic Methylene Blue Dyes by Chemically Synthesized Poly(1,5-diaminoanthraquinone)(Springer, 2025) Akıllı, Aleyna; Özler, Ayşenur; Haspulat Taymaz, Bircan; Hancı, Ahmet; Eskizeybek, Volkan; Kamış, HandanConducting polymers renowned for their exceptional photocatalytic activity, conductivity, and visible-light absorption capabilities present a compelling alternative for advanced photocatalytic applications. In this regard, the creation of conductive polymers of the next generation has enormous promise for improving energy efficiency as well as solving environmental issues. In this study, the conductive polymer poly(1,5-diaminoanthraquinone) (PDAAQ) with a band gap of 1.28 eV and an electrical conductivity of 1.23 S/cm was successfully synthesized via chemical oxidative polymerization using ammonium peroxydisulfate as an oxidant and perchloric acid as an initiator in an acetonitrile polymerization medium. The adsorption-assisted photocatalytic performance of PDAAQ has been investigated in cationic methylene blue (MB) and an anionic direct yellow (DY) dye under visible irradiation. The effect of polymerization medium, oxidant type, polymerization time, and monomer oxidant ratio on adsorption-assisted photocatalytic degradation of MB was investigated. The synthesized PDAAQ polymer demonstrates exceptional photocatalytic performance, completely degrading MB and DYE dyes under visible light illumination in 6 and 8 min through an adsorption-assisted photocatalysis mechanism. Besides, the photocatalytic dye degradation performance of PDAAQ was investigated for the degradation of synthetic wastewater (SWW) under visible light. The PDAAQ polymer proves to be an effective photocatalyst for photocatalytic applications, showcasing exceptional potential in degrading model dyes and treating synthetic wastewater.Öğe Enhancing structural health monitoring of fiber-reinforced polymer composites using piezoresistive Ti3C2Tx MXene fibers(Nature Portfolio, 2025) Haspulat Taymaz, Bircan; Kamış, Handan; Dziendzikowski, Michal; Kowalczyk, Kamil; Dragan, Krzysztof; Eskizeybek, VolkanThe anisotropic behavior of fiber-reinforced polymer composites, coupled with their susceptibility to various failure modes, poses challenges for their structural health monitoring (SHM) during service life. To address this, non-destructive testing techniques have been employed, but they often suffer from drawbacks such as high costs and suboptimal resolutions. Moreover, routine inspections fail to disclose incidents or failures occurring between successive assessments. As a result, there is a growing emphasis on SHM methods that enable continuous monitoring without grounding the aircraft. Our research focuses on advancing aerospace SHM through the utilization of piezoresistive MXene fibers. MXene, characterized by its 2D nanofiber architecture and exceptional properties, offers unique advantages for strain sensing applications. We successfully fabricate piezoresistive MXene fibers using wet spinning and integrate them into carbon fiber-reinforced epoxy laminates for in-situ strain sensing. Unlike previous studies focused on high strain levels, we adjust the strain levels to be comparable to those encountered in practical aerospace applications. Our results demonstrate remarkable sensitivity of MXene fibers within low strain ranges, with a maximum sensitivity of 0.9 at 0.13% strain. Additionally, MXene fibers exhibited high reliability for repetitive tensile deformations and low-velocity impact loading scenarios. This research contributes to the development of self-sensing composites, offering enhanced capabilities for early detection of damage and defects in aerospace structures, thereby improving safety and reducing maintenance expenses.Öğe GaN/ZnO hybrid nanostructures for improved photocatalytic performance: One-step synthesis(TUBITAK, 2023) Üstün, Tugay; Haspulat Taymaz, Bircan; Eskizeybek, Volkan; Kamış, Handan; Avcı, AhmetNanostructured semiconductor materials are considered potential candidates for the degradation of textile wastewater via the photocatalytic process. This study aims to produce hexagonal gallium nitride (GaN) nanoplates and zinc oxide (ZnO) nanoparticles in a deionized water environment utilizing a one-step arc discharge process. Detailed characterization of samples has been completed via scanning electron microscope (SEM), transmission electron microscope (TEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and UV visible spectroscopy methods. The hybrid nanostructure morphologies consist of nanoplates and nanorods of different sizes. The photoperformance of GaN/ZnO hybrid nanostructures was assessed via the malachite green (MG) dye degradation under UV exposure. Under UV exposure, the degradation yield reached 98% in 60 min. Compared to individual ZnO and GaN nanoparticles, the photocatalytic reaction rate of the GaN/ZnO photocatalyst is 2.2 and 3.6 times faster, respectively. Besides, the GaN/ZnO hybrid nanostructures show excellent photocatalytic stability. The energy consumption of the photocatalytic degradation in the presence of GaN/ZnO hybrid nanostructures was 1.688 kWhL–1. These results demonstrate that the GaN/ZnO hybrid nanostructures with improved photocatalytic activity are a reasonable option for the decomposition of textile wastewater under UV light exposure.Öğe Lightweight and sustainable recycled cellulose based hybrid aerogels with enhanced electromagnetic interference shielding(Springer, 2025) Haspulat Taymaz, Bircan; Eskizeybek, VolkanDeveloping lightweight, sustainable, high porosity, and high-performance electromagnetic interference (EMI) shielding apparatus is essential to diminish electromagnetic contamination for protecting human health and electronic devices. Herein, 1D carbon nanotubes (CNTs) and 2D graphene nanoplatelets (GNPs) functionalized recycled cellulose aerogel (RCA) were fabricated via a facile method by freeze, solvent exchange, and ambient drying. The effect of nanofiller type and quantity on the structural, morphological, electrical, thermal and EMI shielding performance of the RC-based aerogel were investigated. The as-prepared hybrid aerogel displays the maximum 40.2 dB electromagnetic interference shielding efficiency (SE) at 8.92 dB GHz with absorption dominant characteristic. CNTs:GNPs nanofillers in recycled cellulose matrix provoked conductivity mismatching and increased interfacial polarization loss. At a density of 0.087 gcm-3, CNTs:GNPs; 7:7%wt. doped RCA exhibits a highly specific SE (SSE) value of 461.95 dBcm3g-1 and an absolute SE (SSE/t) value of 2309.29 dBcm2g-1. These results show that the CNTs:GNPs; 7:7%wt. doped RCA can meet practical applications' lightweight and high-efficiency EMI shielding requirements.Öğe Optimized size sorting of MXene particles via centrifugal sedimentation: a practical approach using an empirical model and image processing technique(Taylor & Francis Inc, 2025) Onat, Buket; Haspulat Taymaz, Bircan; Eskizeybek, Volkan; Kamış, HandanControlling the physical, mechanical, and electrochemical properties of MXene-based materials is crucial for their effectiveness in macroscale applications and is closely tied to the particle size distribution of MXene. This study aimed to accomplish dimensional control and sorting of MXene colloids with different particle sizes using centrifugal sedimentation based on an empirical model. Centrifuge time and rotating speed were identified as key parameters and optimized using a mathematical formula generated from the model, considering particle forces in the solution. A novel image processing technique aimed at ease of use was devised to evaluate the separation process, assuring the audience of its usability. The separation efficiencies were measured individually at rotating speeds ranging from 2900 to 6000 rpm. The optimal experimental settings differed between the supernatant and sediment fractions. The maximum separation efficiency was reached at 86% for the supernatant at 3500 rpm for 49 min and 43% for the sediment at 4200 rpm for 34 min, suggesting that supernatant-based separation is more efficient than sediment-based techniques. This study offers a valuable guideline for separating the sizes of 2D materials. Image processing offers scalable particle size measurement, which improves material property control for a variety of applications.Öğe PANI/CoO Nanocomposite Films with Excellent Photocatalytic Performance for Real Textile Wastewater Treatment(Springer Int Publ Ag, 2023) Haspulat Taymaz, Bircan; Eskizeybek, Volkan; Kamış, HandanTextile wastewater becomes the primary root of environmental pollution due to the rapid infection rates of freshwater, subsurface water, soil, and air. Due to the high absorption abilities of UV and visible light, polymer nanocomposite photocatalyst films (PNPFs) are recognized as potential candidates for textile wastewater treatment. Here, we developed novel cobalt monoxide (CoO)/polyaniline (PANI) PNPFs with high photocatalytic efficiency and stability. The photocatalytic efficiencies of PANI/CoO films were estimated utilizing the degradation of organic dyes and real-textile wastewater (RTW) under various lighting conditions. PANI/CoO PNPF completely decomposed methylene blue and RTW samples in 30 and 45 min under UV light illumination, respectively. We found that the CoO nanoparticles doubled the PANI’s photocatalytic decomposition rate. However, under visible light irradiation, their photocatalytic efficiencies almost halved. Moreover, PANI/CoO PNPF exhibited excellent photocatalytic stability by maintaining the photocatalytic performance for up to five cycles with over 95% removal efficiency. This study yielded an efficient and alternative polymer nanocomposite to decompose wastewater sources contaminated with various textile dyes and may be examined for industrial-scale applications in the future.
