Yazar "Çelikkol, Barbaros" seçeneğine göre listele

Listeleniyor 1 - 2 / 2
  • Küçük Resim
    Öğe
    Comparision of copper alloy mesh with conventional nylon nets in offshore cage farming of gilthead seabream (Sparus aurata)
    (Central Fisheries Research Institute, 2018) Yiğit, Murat; Çelikkol, Barbaros; Özalp, Barış; Bulut, Musa; Dwyer, Robert L.; Yılmaz, Sevdan; Maita, Masashi; Büyükateş, Yeşim
    In the present study, a new net technology of copper alloy mesh (CAM) was tested and compared with traditional nylon nets either with (TNN+AF)-or without antifouling coats (TNN–AF) in a long-term growth experiment on gilthead seabream (Sparus aurata). Fish performed better growth and feed utilization in the CAM pen over the TNN+AF and TNN–AF, with a survival rate over 85% in all cage environments after the 7 months growth period. Relative wet weight gain of seabream in the CAM and TNN+AF pens were 25% and 15% higher compared to the TNN–AF cage, respectively. Surface of the TNN–AF mesh remained clean for two months after sea water deployment, while the mesh size in the TNN+AF pen remained effective for four months, and shrinking in mesh size thereafter. Dissolved oxygen was highest inside the CAM followed by the TNN+AF and TNN–AF cages, respectively. The results of the present study demonstrate that CAM might be beneficial for cage farming in offshore conditions, however further studies are encouraged to evaluate leaching of metals into the marine environment as well as toxic influences on fish tissues and health risks to human consumers. © 2018, Central Fisheries Research Institute. All rights reserved.
  • [ X ]
    Öğe
    CONSTRUCTION, ASSEMBLY AND SYSTEM DEPLOYMENT OF A FISH CAGE WITH COPPER ALLOY MESH PEN: CHALLENGING WORK LOAD AND ESTIMATION OF MAN-POWER
    (2018) Yiğit, Murat; Osienski, Michael; Decew, Judson; Çelikkol, Barbaros; Kesbiç, Osman Sabri; Karga, Mustafa; Acar, Ümit
    In the present study, a 150 cubic m net pen was designed as part of a collaborative research effort betweenthe International Copper Association (ICA-USA), the University of New Hampshire (UNH-USA) and Cannakale Onsekiz Mart University (COMU-Turkey) in August 2011. The fish cage was developed to supportthe creation of a small scale demonstration farm, located in the Strait of Canakkale, off the coast of Guzelyalitown in Turkey. The surface gravity-type, octagonal shaped fish cage was designed to have a diameter of 6m and a copper alloy mesh chamber depth of 5 m. The present study details the cage construction and systemdeployment of one fish cage utilized a chain link mesh net chamber with a copper alloy developed by Wieland-Werke in Germany, with reference to work load challenge and estimation of man-power necessary forthe partial and total work efforts. As a conclusion, one cage equipped with copper-alloy mesh pen was broughtto a final shape with the net chamber assembled and attached to the cage frame in 3 days and 90 man-hours.The HDPE (high density polythylene) cage frame was assembled by an outside company, therefore detail ofthe main cage frame is not discussed in this paper.